Product Selector Chart

 

Product Name Product Family Apperance Mix Ratio Viscosity Fixture Time Max Gap Fill Durometer Shear Strength* Max Temp
Color Resin: Hardener cP in (mm) Shore psi (N/mm2) °F (°C)
Products specifically designed to meet the Halogen Free# specification. Each batch is tested to confirm Halogen Free compliance.***
3261™ 2-Step Acrylic Transparent Yellow to Light Amber 1 Component + Primer 7,5 <15 seconds 0,06 (1,5) D 45 1,450 (10,0) 230 (110)
3344™ UV Cure Epoxy Straw 1 Component 17,5 <3 seconds 0,003 (0,076) N/A 390 (200)
3662™ 2-Step Acrylic Transparent Yellow to Light Amber 1 Component + Primer 9 <15 seconds 0,06 (1,5) D 70 >1,500 (10,3) N/A
3987™ Heat Cure Epoxy Grey 1 Component 87 30 min @ 170°C Unlimited D 78 3,300 (23) 390 (200)
6485™ Anaerobic Green 1 Component + Primer 525 5 minutes 0,003 (0,076) N/A 3,300 (22,8) 350 (177)
H8000™ 2-Part Acrylic Green 10:1 190 20 minutes Unlimited N/A 3,250 (22,4) 225 (107)
HDD 210294B™ Epoxy Green (mixed) 2:1 6 30 minutes Unlimited 2,500 (17) 266 (120)
HF8600™ 2-Part Acrylic Light Blue 2:1 80 35 minutes Unlimited N/A 1,500 (10,3) 225 (107)
General Product Line. Individual batch Halogen Free# compliance available on request.***
3050™ 2-Part Acrylic Yellow 2:1 75 17 minutes Unlimited D 75 2,900 (20) 400 (205)
3103™ UV Acrylic Transparent to Slightly Hazy 1 Component 10 5 seconds 0,51 (13) D 51 1,600 (11)** 300 (149)
3106™ UV Acrylic Clear to Pale Straw 1 Component 5 <5 seconds 0,31 (8) D 53 3,392 (23,4)** 300 (149)
331™ 2-Step Acrylic Cream 1 Component + Activator 20 20 seconds 0,04 (1) N/A 3,100 (21,4) 350 (177)
363™ UV Acrylic Clear to Pale Straw 1 Component 250 <15 seconds 0,07 (1,8) D 50 1,740 (12,0) 356 (180)
401™/ 770™ Cyanoacrylate Colorless to Straw 1 Component 110 15 seconds 0,005 (0,13) N/A 3,200 (22,1) 180 (82)
420™ Cyanoacrylate Clear 1 Component 2 20 seconds 0,002 (0,05) N/A 2,900 (20) 180 (82)
435™ Cyanoacrylate Clear 1 Component 200 30 seconds 0,006 (0,15) N/A 2,700 (18,6) 240 (116)
438™ Cyanoacrylate Black 1 Component 200 30 seconds 0,006 (0,16) N/A 2,800 (19,3) 240 (116)
454™ Cyanoacrylate Clear 1 Component Gel 15 seconds 0,01 (0,25) N/A 3,200 (22,1) 180 (82)
480™ Cyanoacrylate Black 1 Component 200 90 seconds 0,006 (0,15) N/A 3,800 (26,2) 180 (82)
4305™ Light Cure Cyanoacrylate Clear to Pale Green 1 Component 900 <5 seconds 0,008 (0,20) N/A 1,480 (10,2) 240 (116)
4307™ Light Cure Cyanoacrylate Clear to Pale Green 1 Component 900 <5 seconds 0,008 (0,20) N/A 1,480 (10,2) 240 (116)
5055™ Silicone Light Yellow,Transparent 1 Component 350 <30 seconds 0,22 (5,7) A 61 795 (5,45)** N/A (High)
5056™ Silicone Light Yellow, Transparent 1 Component 1,8 <30 seconds 0,25 (6,3) A 43 900 (6,8)** N/A (High)
5623™ Silicone Ultra Clear 2 Component 700 1 hr @ 25°C 10 min @ 100°C Unlimited (oo) 40 N/A 350 (150)
R-513C™ Hot-Melt Reactive Urethane Cream 1 Component 15,000 @ 120°C 5 minutes Unlimited D 40 900 (6,2)** 250 (120)
U-09FL™ Urethane Clear 1:1 5000 120 min Unlimited D 45 1,459 (10,1) 350 (177)
*Shear Strength Measured on Steel, **Shear Strength Measured on Polycarbonate

*** 1. Total Halogen Content in Base Materials as stated in the following regional standards and methods: BS EN 14582, IEC 61189-2, JPCA-ES01, IPC TM-650. Actual test data may be generated by a third party laboratory certified in performing the methods described. Henkel shall not be liable for any and all inaccuracy or omission which may exist in the actual test data generated by the foregoing third party laboratory

*** 2. Products without halogen content tested every batch thus may exceed the specified limits are also available as listed herein. Batch to batch variations exist. Henkel shall not be liable for any and all consequences (direct or consequential) resulting from the products' non-tests of halogen content, the products' exceeding the specified limits and/or the products' batch to batch variation hereof. Henkel offers halogen content certified batches on request.

 

# Halogen free definition

Based on IEC 61249-2-21 Definition
• 900 ppm maximum chlorine
• 900 ppm maximum bromine
• 1500 ppm maximum total halogens